Pyrotron Water Quality Monitoring System
Technical Features of Multi-parameters Water Quality Meter
1)Real-time water quality measurement.
2)All water quality sensor is RS485 Modbus ensure precision to collect data.
3)Easy operation,all operation will will in one touch screen.
4)Datalogger function,all measured data will be recorded.
5)Download,MPG-6099 multi-parameters water quality meter is with USB interface, user can download report by excel type.
6)Wireless function for operation,users only need insert local SIM card,then they can check all data on mobile App or website.
Do You Want To Know More Sensor? Click Here Below.
Photos From Client Feedback:
The product has following characteristics:
♦ Low cost and is suitable for batch and grid air monitoring.
♦ 24H real-time monitoring of outdoor air pollutants.
♦ Multi-gas component measurement (carbon dioxide,sulfur
dioxide,nitrogen dioxide,ozone,Vocs,PM2.5,PM10,temperature,
humidity,wind speed,wind direction,atmospheric pressure,etc.)
Gas sensors can be flexibly customized for kinds of needs.
♦ Fast response speed,high sensitivity,long service life,low maintenance cost.
♦ Data stored and shared to cloud service system platforms.
♦ Used energy-saving power supply(solar energy,lithium battery) or market electricity,for convenient installation.There are Parameter Tables for each monitored gas following:
Flue gas continuous monitoring system(CEMS) (Hereafter called system) can automatically monitor SO2, NO, CO, O2, dust, flue gas flow and pressure, temperature and so on. The system can be flexible and optimized configuration based on the specific conditions of the site parameters and technical requirements, can be measurement for gaseous substances, dust and other in the continuous flue gas emission, to achieve the quantitative control of flue gas emissions.
a) In accordance with the complete system requirements, adopt analysis cabinet structure, complete the " Engineer, Procure and Construct design", simplified installation and commissioning.
b) Adopt imported high-performance membrane pump configuration, the pump with strong anti-corrosion ability, high reliability, long service life, small maintenance workload, reliable operation.
c) The device pretreatment system uses a special structural design, using two dehumidification, three dust elimination, combined with the purification method of coarse filtration and fine filtration, dehumidification and acid fog elimination, in long-term operation shows the effective solution to the high dust, high humidity and sulfur conditions, big maintenance workload, low online continuous operation rate. Stable and reliable performance, small maintenance workload.
Product Parameters
Project |
Indicators |
SO2 Detection range |
Min:0-50ppm,Max:0-100%, |
NO Detection range |
Min:0-50ppm,Max:0-100%, |
O2 Detection range |
0-25%, Electrochemical or zirconia |
Linearity error |
≤±1%F.S. |
Repeatability |
≤1% |
Zero drift |
≤±1%F.S./ week |
Span drift |
≤±1%F.S./week |
Ambient temperature |
5 45 |
Response time(T90) |
<10s |
Size |
19” *3U*320mm |
Analog interface |
3-way 4-20mA output,2-way 4-20mA output |
Data interface |
4-way switch input; 8-way relay output |
Communication Interface |
1-way RS-232,1-way RS-485(Supports Mod-bus protocol) |
Power |
220VAC/50Hz 100W |
Protection grade |
IP42 |
Sample gas input and output interface |
Ø6 Tube Fittings |