Radar Level Sensor

Product Details:

Pyrotron is a professional Radar Level Transmitter Manufacturer. Our radar level transmitter uses radar to continuously measure non-contact liquid level, the sensor sends microwave signals to the medium from above. The surface of the medium reflects the signal back to the sensor. The radar type level sensor uses the received microwave signal to determine the distance to the product surface and calculate the height from it. This radar level transducer is an excellent substitute for differential pressure instruments, magnetostrictive, radio frequency admittance, and magnetic pirated instruments. The measurement technology of this type of radar level transmitter is usually used to measure, and it is not affected by vacuum, dust, temperature, pressure changes, steam and falling gases. As one of radar level transmitter manufacturers, we are devoted to provide high-quality products and services.Specification of Radar Level Transmitter

The specification can according to your requirement to do:

 

 

Advantages of Radar Level Transmitter

Today's high-frequency radars are generally radar level gauges that operate in the K-band (24-26 GHz).

 

• The higher the radar's operating frequency, the shorter the electromagnetic wave wavelength. The easier it is to have better reflections on inclined solid surfaces The narrow beam width can effectively avoid obstacles, and the high frequency can also make the radar using a smaller antenna.

 

• The FMCW FM continuous-wave microwave level meter transmits and receives signals at the same time, and more microwave signals are emitted at the same time.

 

• The solid wave measurement can reduce the wave loss phenomenon in the measurement of high dust solid silo.

 

Therefore, the solid-state mid-and high-frequency FM radar, as a level gauge and level transmitter, can provide accurate and reliable measurements, and is also well used in media such as PP powder and PE powder in the chemical industry. However, due to technical limitations, there is currently no high-frequency radar level gauge that works above the K band.

 

Radar Level Transmitter Used in Some Large Solid Silos

Nowadays, what troubles users in the field of level measurement is the level measurement of some large solid silos, especially for silos that are filled with dust and disturbance within 50/100 meters. Related technical instruments such as capacitors or guided wave radar TDRs will be subjected to strong tensile loads when the material level drops during unloading, which may damage the instrument or pull down the roof of the silo.

 

Heavy hammers often have problems with buried hammers and require frequent maintenance, as do most other mechanical instruments. The high dust conditions may exceed the capabilities of the non contact ultrasonic level sensor measurement system. High-frequency FM radar technology is especially suitable for level measurement of this large solid silo.

 

As a specialized level sensor supplier, Pyrotron has more than 16 years experience in custom manufacturing redar level transmitters on customer's requirements on material, power output, accuracy, sensor type, etc.

 

 

Product Details:

Radar type level transmitter, high temperature resistant, strong dust and high moisture powder warehouse radar level gauge, developed using the principle of frequency modulated continuous wave radar technology, has excellent adaptability and anti-interference ability. The high-temperature resistant radar level meter adopts an aluminum alloy shell, with a novel design and lightweight equipment.

Additional Information:

• Production Capacity: 100 per month
• Delivery Time: 2 weeks
• Packaging Details: cartoon box

Product Details:

Engineered for precision, this explosion-proof radar level sensor is ideal for measuring solid, dusty, and powder-like media in harsh industrial environments. Housed in durable stainless steel with IP68 protection, it ensures reliable, non-contact level measurement even in extreme dust, vibration, or temperature conditions. Perfect for cement, mining, food, and chemical industries requiring safe and accurate solids monitoring.

Additional Information:

• Item Code: 90261010
• Production Capacity: 200 per month
• Delivery Time: 15 days
• Packaging Details: cartoon box

Product Details:

Designed for challenging applications, this explosion-proof radar level sensor offers accurate, non-contact measurement of solid corrosive media. Its robust construction and IP68 protection ensure long-term reliability in aggressive environments such as chemical plants, fertilizer production, and mining. Resistant to corrosion, dust, and high temperatures, it delivers dependable performance where durability and safety are critical.

Additional Information:

• Production Capacity: 100 NO.
• Delivery Time: 15 days
• Packaging Details: Cartoon Box

Product Details:

Radar sensors measure much more reliably than ultrasonic sensors. During the development of the new compact instrument series, the focus was also on simple installation and operation. All application parameters can now be set very quickly. 

Additional Information:

• Production Capacity: 100 per month
• Delivery Time: 2 weeks
• Packaging Details: Cartoon Box

Product Details:

• SDI12 radar level sensor with a 4-20mA option
• Low cost, accurate, reliable and robust device for long term installations
• Measure level of any dielectric surface including water, liquid, oils, solids, and more
• Ideal for research, engineers, hydrologists, agriculture and other industries

The Implexx Radar Level Sensor is an SDI12 radar level sensor which is ideal for the non-contact measuring of level of any surface.

The radar sensor can detect the level, up to 70m distance, of substances such as water, liquids, oils, solids, grains and more.

The Implexx Radar Level is radar level transmitter designed for measuring the changing level of liquids, slurries and bulk solids in tanks, bins and silos.

Features

• Non-contact liquid level measurement
• Accuracy ±5mm
• SDI-12 or 4-20 mA output
• Measuring range up to 70m
• 304SS, 316SS and PTFE coated wetted parts
• Frequency 26 GHz
• Process connection thread or flange
• Optional display programming
• Flexible Outputs

  SDI-12 or 4-20 mA? The Implexx Ultrasonic Water Level device can transmit data via either protocol. Uniquely, it is possible to switch between either protocol at any time.

  Therefore, the Implexx Ultrasonic Water Level device is suitable for a range of interfaces including data loggers, PLC's, IoT devices, LoRaWAN, NB-IoT, WiFi, modems, Arduino, Raspberry Pi, and many more.

  Also, the Implexx Ultrasonic Water Level device is suitable for the ES-SYS range of monitoring systems.

• Easy to Install and Configure

  The Implexx Radar Level Sensor can be installed via a thread or flange. Multiple thread or flange options are available for maximum flexibility. Therefore, the radar level sensor is suitable for a wide range of applications and installations.

  The Implexx Radar Level Sensor also has an optional easy to use, touch pad and LCD display where the device can be easily configured. Additionally, there are a range of SDI-12 commands to operate and interface the device with any data acquisition system.

  The standard cable length is 5m yet this can be extended to potentially hundreds of metres, if required.

   

  Principle of Operation

  The antenna of radar level instrument transmits a very narrow microwave pulse which propagates at the speed of light in space. Consequently, when meeting the dielectric surface to be measured, part of its energy is reflected and received by the same antenna. The time interval of transmitting and receiving pulses is proportional to the distance between antenna and dielectric surface to be measured. Therefore, the distance between antenna and dielectric surface to be measured can be calculated.

Additional Information:

• Delivery Time: 10-15 days
• Packaging Details: Cartoon-Box

Product Details:

Pyrotron is a professional Radar Level Transmitter Manufacturer. Our radar level transmitter uses radar to continuously measure non-contact liquid level, the sensor sends microwave signals to the medium from above. The surface of the medium reflects the signal back to the sensor. The radar type level sensor uses the received microwave signal to determine the distance to the product surface and calculate the height from it. This radar level transducer is an excellent substitute for differential pressure instruments, magnetostrictive, radio frequency admittance, and magnetic pirated instruments. The measurement technology of this type of radar level transmitter is usually used to measure, and it is not affected by vacuum, dust, temperature, pressure changes, steam and falling gases. As one of radar level transmitter manufacturers, we are devoted to provide high-quality products and services.Specification of Radar Level Transmitter
The specification can according to your requirement to do:
 
Product Nameradar level sensorMaterialSus304/316TypeMeterApplicationFuel Level SensorPower supply24VDC/220VACOutput4~20mAMeasuring Range70mAccuracy3mmSensor typerodCertificateISO9001
 
Advantages of Radar Level Transmitter
Today's high-frequency radars are generally radar level gauges that operate in the K-band (24-26 GHz).
 

The higher the radar's operating frequency, the shorter the electromagnetic wave wavelength. The easier it is to have better reflections on inclined solid surfaces The narrow beam width can effectively avoid obstacles, and the high frequency can also make the radar using a smaller antenna.

 

The FMCW FM continuous-wave microwave level meter transmits and receives signals at the same time, and more microwave signals are emitted at the same time.

 

The solid wave measurement can reduce the wave loss phenomenon in the measurement of high dust solid silo.

 
Therefore, the solid-state mid-and high-frequency FM radar, as a level gauge and level transmitter, can provide accurate and reliable measurements, and is also well used in media such as PP powder and PE powder in the chemical industry. However, due to technical limitations, there is currently no high-frequency radar level gauge that works above the K band.
 
Radar Level Transmitter Used in Some Large Solid Silos
Nowadays, what troubles users in the field of level measurement is the level measurement of some large solid silos, especially for silos that are filled with dust and disturbance within 50/100 meters. Related technical instruments such as capacitors or guided wave radar TDRs will be subjected to strong tensile loads when the material level drops during unloading, which may damage the instrument or pull down the roof of the silo.
 
Heavy hammers often have problems with buried hammers and require frequent maintenance, as do most other mechanical instruments. The high dust conditions may exceed the capabilities of the non contact ultrasonic level sensor measurement system. High-frequency FM radar technology is especially suitable for level measurement of this large solid silo.
 
As a specialized level sensor supplier, Pyrotron has more than 10 years experience in custom manufacturing radar level transmitters on customer's requirements on material, power output, accuracy, sensor type, etc.

Additional Information:

• Production Capacity: 100 per month
• Delivery Time: 2 weeks
• Packaging Details: Cartoon Box

Product Details:

The Radar Level Transmitters are excellent devices for non contact level measurement. The microwave impulses, emitted by the radar’s antenna, travel at speed of light and a part of their energy, reflected by the surface of the medium to be measured, is received by the same antenna. The period of time (flying time) between the emission and the arrival of the impulses, is proportional to the existing distance between the antenna and the surface of the medium to be measured.

Additional Information:

• Delivery Time: 10-15 days